Aquiles.me

nanoCET implementation

First published:

Last Edited:

Number of edits:

In @faez2016 Nanocapillary electrokinetic tracking for monitoring charge fluctuations on a single nanoparticle there is a follow up to @faez2015 Fast, Label-Free Tracking of Single Viruses and Weakly Scattering Nanoparticles in a Nanofluidic Optical Fiber on how to use hollow optical fibers to measure the electrophoretic mobility of single gold nanospheres. The idea of the setup is the same used by Dispertech , but with two additional electrodes next to the fiber and perpendicular to it.

The challenges of the implementation are (see also challenges of electrophoretic mobility measurements ):

  • Electrodes can’t be perpendicular to the axis of the fiber (the movement must be along the channel)
  • Complex geometry requires careful modeling to establish charge distribution inside the measurement area
  • Screening of the electrodes results in data that must be analyzed in light of a proper model

The measurement is limited to around 100ms, after which the screening of the electrodes stops the movement of the particles in the channel. The frequency of the electrodes is 200Hz, with framerates of 2kHz, gives a good Nyquist value for the measurement. Averaging several frames it is possible to observe driving movement after 500ms, which means the movement is really dampened by the screening (or enhanced by the initial osmotic flow).

The Comsol simulation assumes cylindrical symmetry also for the electrodes, which was not the experimental setup depicted on the paper. Time frames and speeds seem to be in line with the experimental results but further analyses still need to happen.

Potential follow-up experiments:

  • Using particles with different charges and showing that the osmotic flow is not driving the oscillatory movement of the particles. In the discussion of @faez2016 Nanocapillary electrokinetic tracking for monitoring charge fluctuations on a single nanoparticle , the simulations yield time-scales of ~.01ms, while experiments have timescales of ~10ms. From @bazant2004 Diffuse-Charge Dynamics in Electrochemical Systems , the timescales are between 0.6ms and 60ms for the experimental setup, which means simulations must be re-scaled or a better model introduced.

Do you like what you read?

Get a weekly e-mail with my latest thoughts, reflections, book reviews, and more.

Aquiles Carattino
Aquiles Carattino
This note you are reading is part of my digital garden. Follow the links to learn more, and remember that these notes evolve over time. After all, this website is not a blog.
© 2020 Aquiles Carattino
Privacy Policy
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.